Liquid Metal Kits

We offer liquid metal Metall-FX™ kits and patination fluid from our full range of metals to choose from. Each 10kg kit comprises metal and the binder with our full instructions. Price on application. Limits apply within the UK.
We offer discounts for bulk purchase. Please contact us for more details.

Metall-FX™ metal kits come in the following metals: Aluminium Brass Light/ Standard / Dark Bronze White Bronze Copper Iron Pewter Nickel Silver Stainless Steel Tin Zinc

Application
Metall-FX™ is as simple to use as paint. Apply using brush or standard HVLP (high volume, low-pressure) spray equipment. Clean up afterwards using standard acetone based thinners.

Coverage guide
5 to 10 metres squared per litre depending on the absorbency and texture of the base material.

Drying time
After application Metall-FX™ will take between one and a half to three hours to dry depending on humidity and room temperature.

Substrate
Metall-FX™ has excellent adhesion properties when used on most surfaces including MDF, Plaster, Plasterboard, Glass, Concrete, Fibreglass, Plastic, Polystyrene, Paper and even Fabric. We advise our customers to experiment with the product for further applications.

Finishing
When Metall-FX™ is dry it will have a matt finish. This is due to oxidization that occurs after contact with the air. Lightly sand the surface to reveal the pure metal. Then polish the surface to the shine you require using standard metal polishing techniques.

Other creative processes can be applied such as acid wash, patina wash, sandblast, wire brush and machined textures. Again, we encourage our customers to experiment with Metall-FX™ for all sorts of creative metal applications. As with any real metal, seal it with a clear metal lacquer to prevent tarnishing.

Metall-FX™ is between 90% and 97% pure metal. Thus objects coated with Metall-FX™ take on the colours of the ambient light that surrounds them in a way that only real metal can. It is waterproof and resistant to heat and most household chemicals. It has passed Fire Testing: Flammability, Heat Release rate (OSU) and Smoke Emission (NBS) requirements of FAR/JAR/CS 25.853(d) APP.F PI.IV(g) issued by AIM Composites Ltd tested under Federal Aviation Authority rules conducted for and on behalf of Virgin Atlantic Airways.

Please contact us for more details.